RP-ERROR – Negative submit report to indicate the MO SMS message was not received correctly and to return the TP-Failure Cause parameter. You can specify the value of this parameter to be returned to the mobile station. See Failure Cause for more information. The following GPIB command is available for configuring the submit report type:, TP-Failure-Cause (TP-FCS) The TP-Failure-Cause field is used to report the reason for failure to transfer or process a short message. It consists of a single octet used as follows:, TP-Failure-Cause : M: I: Parameter indicating the reason for SMS-SUBMIT failure: TP-PI: TP-Parameter-Indicator: M: o: Parameter indicating the presence of any of the optional parameters which follow: TP-SCTS: TP-Service-Centre-Time-Stamp: M: 7o. 5) Parameter identifying the time when the SC received the SMS-SUBMIT. See subclause 9.2.3.11: TP-PID …
11/21/2006 · In an embodiment, the TP-Failure Cause subparameter is defined to have three fields. Table 6 lists the fields in the TP-Failure Cause subparameter, their lengths, and their short description and values (where appropriate).
12/3/2008 · TP-Failure Cause (TP-FCS) – 9.2.3.22: Submit Report if RP type is set to RP-ERR: Message Reference: TP-Message Reference (TP-MR) – 9.2.3.6: Status Report: More Messages to Send: TP-More Messages to Send (TP-MMS) – 9.2.3.2: Deliver, Status Report: Parameter Indicator: TP-Parameter Indicator (TP-PI) – 9.2.3.27: Submit Report, Status Report …
If TP-Failure-Cause is absent we make a decision of temporary / permanemt error depending on smdeliveryfailure per SMEnumeratedDeliveryFailureCause. If not specified – then a failure is permanent by default exept of memoryCapacityExceeded that is temporary by default.
13 TP-FCS TP Failure Cause . 14 TS Teleservice Server. 15 TSAR Teleservice Segmentation and Reassembly. 16 UDH Universal Data Header. 17 VLR Visitor Location Register. 18 VPLMN Visitor Public Land Mobile Network. 19 WAP Wireless Application Protocol, > SMS- TP Failure Cause > SMS-TP Status PDP > Connection Type > Connection Type Str > IP Address 1 > IP Address 2 > IP DL Data Amount > IP UL Data Amount > APN > Mobile IP Address > NSAPI > Received Guaranted Bitrate Downlink > Received Guaranted Bitrate Uplink, Related websites. AdminFavorites.com Internet resource for ICT administrators and operators. MonitorTools.com Internet resource for ICT administrators and operators.
Here’s a list of all of the +CMS ERROR codes for the GSM modem interface … they can be found defined in the ETSI GSM specs. I figure it is worth posting as they are split between the GSM 07.05, GSM 03.40 and GSM 04.11 specs, and I frequently have to look this up for support incidents.
